HV-HD30
DK-H32
HV-C20
HV-D5W
HV-D15
HV-D25
HV-D27
HV-D37
HV-D30
HV-F31
HV-F22
KP-D20A
KP-D20B
KP-D591
KP-D8
KP-F100C
KP-M1A
KP-M2
KP-M2R
KP-M3
KP-F102
KP-F120
KP-F3
KP-F3W
VM-902
VM-920
VM-1220
VM-1720

 
   
DK-H32 1 MB
 
DK-H32 2/3 inch IT 3-CDD Colour Camera
The new DK-H32 HDTV special application camera is ideal for graphics stand, point of view and remote observation applications. Images of the highest quality and stability are assured with the three 2/3" 2.2-milion pixels CCDs and a 1.8 milliongate gates single chip DSP.

This high-tech DSP, offering 30-bit accuracy, was designed for Hitachi's broadcast camera line to outperform traditional analog signal processing. The DK-H32's functions can easily be controlled remotely from a personal computer or dedicated control panel.

Command and communications protocol are available to users wishing to build custom software control applications.

Features:
-- High S/N with HD-SDI. Outstanding Signal-to-noise ratio >54dB measured on the HD-SDI (1080i) output
-- 14-bit ADC with the latest generation Hitachi DSP
High dynamic range and color fidelity are achieved by employing 14-bit
analog-to-digital converters on the RGB CCDs' outputs. Hitachi is leading developer for High performance CPU & DSP in Broadcast Fields. Hitachi's highest 0.18um VLSIC processor with 3 million gates. 30-bit internal processing to provides high dynamic range with superb video stability and is maintenance free
-- High Resolution. The three 2/3-inch 2.2million pixel CCDs with microlenses and digital signal processing deliver >1000 TV lines horizontal resolution (Y channel)
-- Small & light weight head
-- Image enhancements from digital processing
-- Versatile CCD drive functions
-- Improved operational ease
-- Bi-directional data transfer. An RS-232C input is provided on the camera head to allow remote control from a personal computer. An lD number for each camera can be registered allowing multiple cameras to be controlled from a single computer
-- Auxiliary connector for external control. A simple control box can be connected to the AUX connector for externally controlling the lens zoom/focus and motorized pan/tilt head from a personal computer
-- Three applications files (standard, observe, microscope). Pre-programmed files also allow the user to adjust Detail, Masking, knee, and other functions
-- Remote filter wheel